With real estate property going off and on the market daily, it becomes very important to ensure that your listings are attractive. Real estate photography is constantly in need. Real estate professional photography can seem a little complicated at first. But here are some real estate photography tips that can help you create consistent, beautiful photos.
Decluttering is perhaps the most significant real estate photography tip that you can get. You need to encourage the real estate agency that is in impact with the homeowners. When it comes to our own houses, we get used to parts of clutter increasing over time. However, all the small things that we don’t pay attention to will stand out in a photograph. Ensure that homeowners keep the outside and interior area as clean as possible, including desks, coffee tables, countertops, and so on. If you want to display a few decorative items, you can leave a maximum of three items out. When you shoot interiors, make sure that you do not photograph cabinets until they are customized or spacious. A lot of times, a wardrobe is basically the perfect spot to store those small items unless the photo shoot finishes. Many times you will arrive at the house, and there is still clutter which you know would not look impressive in the photographs. There is absolutely nothing wrong with asking the homeowners to hide a few extra things if you think that it would help the house.
Use Bounce and Flash to Diffuse
Homeowners and real estate agents are normally in a hurry to showcase the listing of the house online to find potential buyers. A lot of budgets normally do not allow for a lot of photography hours for just one listing. You can use a flash unit and connect it to your camera. That way you can move from one place to another throughout the property faster. When you use a flash camera, make sure that you bounce the light off the walls. This will help in softening the light.
When you point the flash of the camera directly at the space of the room, you can be sure to get a dreaded bright space in the center, and then you will find a quick drop of shadow around it. This is called vignetting in photography terms and you need to avoid it as much as possible during real estate photography. You can also turn the flash and position it to bounce off the walls to your side or the ones behind you. With this you allow the light to get diffused into the space and manage to achieve a more even look. You can even try to attach independent light diffusers right at your light source. However, these situations might not be possible if you simply use a pop-up flash on the camera.
Experts suggest getting a flashgun that highlights a flash head that you can shift to many angles. It is also recommended that you use a flash in manual mode and achieve the entire control of the strength of the light. A lot of real estate agents use 1/16th power as a beginning point and start adjustment from there. If you need to shoot on bright windows, you might want to get to the highest power possible as full power. For the times that you need to shoot larger spaces, you should install the flash units right at your light stands. You can position them just out of the frame and then angle them right towards the ceiling. Basically, the angle of your lights will depend mainly on the shape and size of the room. In a lot of cases, you will have to place your strobes right at the corners, or also behind you. However if those areas are giving you some trouble, you might need to try various spaces till you get even brilliance in the room.
Shoot straight for minimum distortion
This is one of the most crucial tips especially when you are learning how to shoot real estate photography. When you shoot at different angles, you need to make sure that you keep the camera completely straight. This will help you in avoiding distortion that you can later straighten in Photoshop or Lightroom. You need to use a sturdy tripod or constantly adjust the live view settings of your camera to display the virtual level or the virtual horizon. Sometimes you will notice that when you point your camera even a little, all the vertical lines will start to slant. These vertical lines will distort in either of the directions. The absolute height for real estate photography would be about 5 feet. Every home is a different case. However, 5 feet is the general height that would feel the most balanced and look natural. If you go very high up with the camera, you will start to notice less livable areas and too much ceiling. On the other hand, if you go too low with it, you start to notice too much furniture and the pictures wouldn’t actually focus on the room.
To ensure that your real estate listing generates the most favorable results, real estate photography is a vital skill. Every real estate agent is battling to get the attention of homebuyers with the most engaging real estate photos. You need to however focus on maintaining consistency in the look and process.